Faro Gage Training Workbook page 20

Basic Training Workbook
Version 1.5 - August 2007
Practical - Calibration
Securely attach the FARO Probe Calibration cone near the FARO Gage. For best results,
position the calibration cone approximately 2/3 of the Gage arm's reach away from the base.
1 Choose Gage Setup < Probe Calibration.
2 Select the RUN button.
3 Choose your probe from the Current Probe list.
4 Select the H
Chapter 1: Getting Started
C icon to start the probe calibration.
OLE ALIBRATION
10