Advertisement
Basic Training Workbook
Version 1.5 - August 2007
38 Select the features.
•
39 Select OK to complete the alignment.
N
: The alignment icon will now display a red and blue arrow indicating that an alignment
OTE
is present.
The face determines the XY plane and Z axis orientation; the edge determines the X axis
direction; the hole determines the origin point. The Y axis is set automatically as it will always
be in the same orientation relative to X and Z, according to the commonly used Right Hand
Rule.
The coordinate system created should look like this:
Chapter 4: Basic Part Measurements (Metrology Mode)
The software should have pre-selected the face for the first feature, the edge for the
second and the hole for the third feature.
+Z
+Y
+X
52
+Y
+X
Advertisement
