Advertisement
Hardware Operation
The FARO Gage has two sets of buttons. The GREEN (Front) button is used to collect data,
and the RED (back) button to accept the data. When a button is pressed, the LED light
illuminates (red or green).
Every time you power on the FARO Gage Arm, you must reference the encoders (joints). The
LED in the handle will flash red until the encoders have been cleared.
Each of the six encoders in the
FARO Gage must be referenced
before the system can output data. If
you attempt to execute a FARO
Gage command prior to referencing
the encoders, the end stop warning
window will show all six encoders in
error until each is referenced. In a
systematic manner, rotate links 1
through 6 until each warning clears.
BACK BUTTON
LED
FRONT BUTTON
3
Basic Training Workbook
Version 1.5 - August 2007
Chapter 1: Getting Started
Advertisement
