Table of Contents
Advertisement
Assembly instructions Everest
7 Calibrate the Everest engine Base Camp 4140
engine Base Camp 4140
®
7.3 Evaluate the calibration body
7.3.1 Measure the calibration body
▶ Perform the following measurements with the micrometer screw
(Mat. no. 1.002.5839) and note the mark (small notch in the side of the cavity):
▶ Enter the measured values for Y
Note
All of the values have to be entered in µm.
7.3.2 Check the active machine parameters
▶ Switch to the "INFO" menu
▶ Click the button "Version" (F2).
|
7.3 Evaluate the calibration body
, Y
, Z
and Z
1
2
1
41/51
on the form.
2
Advertisement
Table of Contents
