Receiving - YASKAWA LonWorks SI-W3 Installation Manual

Drive
GA700
GA800
HV600
FP605
Refer to "PRG" on the drive nameplate for the software version number.
*1
Note:
• Refer to the option package labeling in the field designated "PRG (four digit number)" or the option labeling in
the field designated "C/N (S + four digit number)" to identify the option software version.
• For Yaskawa customers in the North or South America region:
If your product is not listed in
product. The web page provides a list of option manuals by product, and a direct link to download a PDF of
the manual.
Scan QR code Or refer to: http://www.yaskawa.com/optionlookup
3

Receiving

After receiving the option package:
• Make sure that the option is not damaged and no parts are missing.
Contact your sales outlet if there is damage to the option or other parts. Contact your
sales outlet if there is damage to the option or other parts.
NOTICE
option. Failure to comply could damage the drive and option.
• Make sure that the model number on the option nameplate and the model number on
the purchase order are the same. Refer to
• Contact the distributor where you purchased the option or contact Yaskawa or a
Yaskawa representative about any problems with the option.
YASKAWA TOEP C730600 93B LonWorks Installation Manual
CIMR-ZxxPxxxx
CIMR-ZxxWxxxx
CIPR-GA70xxxxx
CIPR-GA80xxxxx
CIPR-HV60xxxxx
CIPR-FP65xxxxx
Table 2.1, refer to the web page below to confirm this manual is correct for your
Damage to Equipment. Do not use damaged parts to connect the drive and the
Model
Figure 4.1 for more information.
3 Receiving
*1
Software Version
≥ 1010
≥ 9010
≥ 1011
≥ 1010
9