A - Option
B - Included screw
6.
Use one of the remaining included screws (B) to connect the ground wire (A) to
the ground terminal and installation hole on the option.
Tighten the screw to a correct tightening torque:
• 0.5 N∙m to 0.6 N∙m (4.4 in∙lb to 5.3 in∙lb)
Note:
Wire the ground wire as specified by
YASKAWA TOEP C730600 93B LonWorks Installation Manual
C - Connector CN5
Figure 5.25 Install the Option
Figure
5.26.
5 Installation Procedure
39