YASKAWA LonWorks SI-W3 Installation Manual page 24

5 Installation Procedure
1.
Remove the keypad (B) and front cover (A).
Shut off power to the drive and wait for the time specified on the drive warning
label at a minimum. Make sure that the charge indicator LED is unlit, then remove
the keypad and front cover. Refer to the drive manuals for more information.
NOTICE
you observe correct electrostatic discharge (ESD) procedures. If you do not follow
procedures, it can cause ESD damage to the drive circuitry.
A - Drive front cover
24
Damage to Equipment. When you touch the option, make sure that
Figure 5.9 Remove the Front Cover and Keypad
B - Keypad
YASKAWA TOEP C730600 93B LonWorks Installation Manual