Receiving - YASKAWA SI-P3 Installation Manual

3

Receiving

After receiving the option package:
1. Make sure that the option is not damaged and no parts are missing. Contact your sales
outlet if the option or other parts appear damaged.
NOTICE: Do not use damaged parts to connect the drive and the option. Failure to comply could damage
the drive and option.
2. Confirm that the model number on the option nameplate and the model listed in the
purchase order are the same. Refer to
distributor where the option was purchased or the Yaskawa sales office immediately about
any problems with the option.
u
Contents and Packaging
Description:
Quantity:
<1> GA700 drives do not use the ground wire.
<2> GA700 drives use two screws only.
u
Installation Tools
• A Phillips screwdriver. Phillips screw sizes vary by drive capacity.
• A flat-blade screwdriver (blade depth: 0.4 mm (0.02 in.), width: 2.5 mm (0.1 in.)).
• A pair of diagonal cutting pliers.
• A small file or medium-grit sandpaper.
Note: This manual does not list tools required to prepare option cables for wiring.
YASKAWA ELECTRIC TOBP C730600 82B YASKAWA AC Drive Option SI-P3 Installation Manual
Table 2 Contents of Package
Ground
Option Wire
<1>
1 1
Figure 1 on page 10
LED Label for
Screws YASKAWA
(M3) AC Drive
1000-Series
ERR RUN
BF COMM
3 1
<2>
3 Receiving
for details. Contact the
LED Label for
YASKAWA Installation
AC Drive
GA700
1
Manual
MANUAL
1
9