*3
LED label has transparent background and white letters. Please make sure that you use the correct label for
Z1000, HV600, or FP605.
◆
Installation Tools
You can use these tools to install the option to the drive:
• A Phillips screwdriver or slotted screwdriver (blade depth: 0.4 mm (0.02 in), width: 2.5
mm (0.1 in))
*1
• A flat-blade screwdriver (blade depth: 0.4 mm (0.02 in.), width: 2.5 mm (0.1 in.)).
• A pair of diagonal cutting pliers.
• A small file or medium-grit sandpaper.
*1
Phillips screw sizes are different for different drive capacities. Prepare different
screwdrivers for different screw sizes.
Note:
If you create a connector on the communication cable side, a separate tool is necessary.
YASKAWA TOEP C730600 93B LonWorks Installation Manual
.
3 Receiving
11