Procedures To Install And Wire Options On A Drive; Procedure A - YASKAWA LonWorks SI-W3 Installation Manual

5 Installation Procedure
NOTICE
correct electrostatic discharge (ESD) procedures. If you do not follow procedures, it can cause ESD
damage to the drive circuitry.
NOTICE
voltage. Incorrect equipment sequencing can cause damage to the drive.
NOTICE
You can cause damage to the drive and connected equipment.
NOTICE
can cause the drive or option to function incorrectly.
NOTICE
can cause malfunction or damage to the equipment.
NOTICE
the drive and connecting peripheral devices. Incorrect connections can cause damage to the option.
◆

Procedures to Install and Wire Options on a Drive

Procedures to install and wire the option are different for different drive models.
Refer to the following table to check the procedures to install and wire the option on a
drive.
Table 5.1 Procedures to Install and Wire Options on a Drive
Drive
A1000
U1000
U1000L
Z1000
Z1000U
GA700
GA800
HV600
FP605
■

Procedure A

This section shows the procedure to install and wire the option on a 1000-series drive.
16
Damage to Equipment. When you touch the option, make sure that you observe
Damage to Equipment. Do not de-energize the drive while the drive is outputting
Do not operate a drive or connected equipment that has damaged or missing parts.
Use Yaskawa connection cables or recommended cables only. Incorrect cables
Damage to Equipment. Correctly connect the connectors. Incorrect connections
Damage to Equipment. Make sure that all connections are correct after you install
Procedures to Install and Wire
Options on a Drive
Procedure A
Procedure A
Procedure A
Procedure B
Procedure A
Procedure C
Procedure C
Procedure D
Procedure D
YASKAWA TOEP C730600 93B LonWorks Installation Manual
Reference Page
16
16
16
22
16
28
28
33
33