Procedure D - YASKAWA LonWorks SI-W3 Installation Manual

A - Keypad connector tab
B - Keypad connector
C - Drive front cover
Figure 5.19 Install the LED Status Ring board, Front Cover, and Keypad
7.
Set drive parameters in
performance.
■

Procedure D

This section shows the procedure to install and wire the option on an HV600 or FP605
drive.
Prepare the Drive for the Option
Correctly wire the drive as specified by the manual packaged with the drive. Make sure
that the drive functions correctly. For information about drive connection and wiring, refer
to the manuals for the drive on which you will use this option.
YASKAWA TOEP C730600 93B LonWorks Installation Manual
D - Keypad
E - LED Status Ring board
Related Drive Parameters on page 44
5 Installation Procedure
for correct option
33