Procedure C - YASKAWA LonWorks SI-W3 Installation Manual

5 Installation Procedure
A - Drive front cover
Figure 5.13 Replace the Front Cover and Keypad
7.
Set drive parameters in
performance.
■

Procedure C

This section shows the procedure to install and wire the option on a GA700 or GA800
drive.
Prepare the Drive for the Option
Correctly wire the drive as specified by the manual packaged with the drive. Make sure
that the drive functions correctly. For information about drive connection and wiring, refer
to the manuals for the drive on which you will use this option.
28
B - Keypad
Related Drive Parameters on page 44
YASKAWA TOEP C730600 93B LonWorks Installation Manual
for correct option