YASKAWA LonWorks SI-W3 Installation Manual page 25

2.
Put the LED label (B) in the correct position on the drive front cover (A).
A - Drive front cover
Figure 5.10 Put the LED Label on the Drive Front Cover
3.
Install the option (A) into the CN5 connector (C) on the drive and use one of the
included screws (B) to put it in place.
Note:
The drive has only two ground terminals. When you install three options to the drive, connect two
ground wires to share one drive ground terminal.
YASKAWA TOEP C730600 93B LonWorks Installation Manual
B - LED label
5 Installation Procedure
25