Procedure B - YASKAWA LonWorks SI-W3 Installation Manual

5 Installation Procedure
A - Drive front cover
B - Keypad
Figure 5.7 Replace the Front Cover, Terminal Cover, and Keypad
8.
Set drive parameters in
performance.
■

Procedure B

This section shows the procedure to install and wire the option on a Z1000 drive.
Prepare the Drive for the Option
Correctly wire the drive as specified by the manual packaged with the drive. Make sure
that the drive functions correctly. For information about drive connection and wiring, refer
to the manuals for the drive on which you will use this option.
22
C - Drive terminal cover
Related Drive Parameters on page 44
YASKAWA TOEP C730600 93B LonWorks Installation Manual
for correct option