Quick Release Platform - Thermo Scientific SHKE8000 Series Maintenance Manual

Section 1
Installation
Quick Release
Platform
1-14 Model SHKE8000 Series Shakers
The quick release platform base and (optional) platform assembly are
shipped already installed in the unit.
1. To load the platform, open the chamber door.
2. Grasp the center handle, pull the inner release
bar upward, then press the handle downward
until it clicks into a horizontal position.
3. Pull outward on the platform. Load your samples, making sure all are
securely fastened. Push the platform all the way into the chamber.
4. Pull up on the inner release bar and press the center handle upward
into a vertical position. The door to the chamber may now be closed.
Figure 1-24. Handle When Loading
Note The platform must be fully inserted into the cabinet and the center
handle pressed into the 'up' position to ensure the platform is secured.
Figure 1-23. Handle
Figure 1-25. Handle Up to Close Door
s
Thermo Scientific