Table of Contents
Advertisement
3.1
About the User I/O connector
The User Input/Output (I/O) connector is situated on an end panel of the DSTREAM unit.
The connector is a 10-way 2.54mm pitch Insulation Displacement Connector (IDC) header that mates
with IDC sockets mounted on a ribbon cable, as shown in the following figure.
You must establish a common ground between the DSTREAM unit and the target hardware before you
connect any of the User I/O signals.
Related references
3.2 User I/O pin connections on page 3-55.
Related information
The DSTREAM unit.
ARM 100956_0527_00_en
Warning
Copyright © 2010–2012, 2015–2017 ARM Limited or its affiliates. All rights reserved.
Output 1
Output 3
Output 5
Output 6
+3.3V
Non-Confidential
3 ARM DSTREAM User I/O Connections
3.1 About the User I/O connector
1
2
3
4
5
6
7
8
9
10
Figure 3-1 User I/O pin connections
Output 2
Output 4
Input 1
Input 2
GND
3-54
Advertisement
Table of Contents
