Table of Contents
Advertisement
2.1
About DSTREAM
2.1.1
See also
ARM DUI 0481A
ID052210
DSTREAM is an ARM
debug and trace hardware unit. It enables you to connect a software
®
debugger to an ARM processor-based target using a hardware interface such as JTAG or Serial
Wire Debug (SWD). It also enables the collection of trace from the device for non-intrusive
debug and code optimization.
Note
Some debuggers are unable to capture trace from the external trace port of a System-on-Chip
(SoC) device. See the documentation that accompanies your debugger for details of the trace
capabilities of your debugger.
Concepts
•
DSTREAM contents on page 2-3
•
Availability and compatibility on page 2-4
•
Introduction to the DSTREAM components on page 2-5.
Copyright © 2010 ARM. All rights reserved.
Non-Confidential
Introduction to DSTREAM
2-2
Advertisement
Table of Contents
