Attaching The Header; Attaching The Forming Shield - MacDon R85 Operator's Manual

3.7 Attaching the Header

3.7.1 Attaching the Forming Shield

DANGER
To avoid bodily injury or death from unexpected startup of the machine, always stop the engine and
remove the key from the ignition before leaving the operator's seat for any reason.
1. Stop the engine and remove the key.
2. Remove the two clevis pins (A) from the forming shield
forward end.
3. Position forming shield (A) under the windrower frame.
214366
OPERATION
A
Figure 3.22: Forming Shield
Figure 3.23: Forming Shield under
Windrower Frame
41
A
Revision A