MacDon R85 Operator's Manual page 178

5. Turn adjuster nut (A) counterclockwise until springs are
loose and there is no tension on belt (B).
6. Remove conditioner drive belt (A).
7. Install new conditioner drive belt (A) onto pulleys
ensuring it is in the pulley grooves.
8. Tension conditioner drive belt (A). Refer to
the Conditioner Drive Belt, page
9. Install and tension auger drive belts. Refer to
the Auger Drive Belts, page
10. Close the driveshield. Refer to
30.
214366
MAINTENANCE AND SERVICING
Inspecting
159.
Replacing
167.
3.4 Driveshields, page
161
B
Figure 5.51: Drive Belts (Left Side)
A
Figure 5.52: Drive Belts (Left Side)
A
Revision A