MacDon R85 Operator's Manual page 63

Routing hydraulic hose bundle from header to windrower:
1. Move windrower left (cab-forward) platform (A) to
OPEN position. For instructions, refer to the windrower
operator's manual.
2. Route hose bundle (A) from the header under the
windrower frame, and insert pin (B) into hole in
windrower frame.
3. Place hoses on support (C) and on the hose support on
the forming shield (not shown).
214366
OPERATION
Figure 3.33: Windrower with Left Platform in
Open Position
Figure 3.34: Hydraulic Hoses
46
A
A
C
B
Revision A