MacDon R85 Operator's Manual page 93

7. Raise and unlock lever (A) and undo the three cinch
straps (B).
8. Move hose bundle to store on header.
9. At the header, disconnect electrical connector (D) by
turning the collar counterclockwise and pulling
connector to disengage.
10. Disconnect the pressure (A), return (B), and case
drain (C) hoses.
11. Move the hose bundle from header to the left-side (cab-
forward) hose support (B).
12. Rotate lever (A) clockwise and push to engage bracket.
13. Route the electrical harness through hose support (B)
and attach cap to electrical connector (C).
214366
OPERATION
Figure 3.98: Hose Bundle
Figure 3.99: Hydraulic Connections
A
Figure 3.100: Hose Bundle
76
A
B
A
B
D
B
C
C
Revision A