Understanding Safety Signs - MacDon R85 Operator's Manual

1.8 Understanding Safety Signs

MD #113482
General hazard pertaining to machine operation and
servicing
CAUTION
To avoid injury or death from improper or unsafe machine
operation:
•
Read the operator's manual and follow all safety
instructions.
•
Do not allow untrained persons to operate the machine.
•
Review safety instructions with all Operators every year.
•
Ensure that all safety signs are installed and legible.
•
Make certain everyone is clear of machine before starting
engine and during operation.
•
Keep riders off the machine.
•
Keep all shields in place and stay clear of moving parts.
•
Disengage header drive, put transmission in Neutral, and wait for all movement to stop before leaving
operator's position.
•
Stop the engine and remove the key before servicing, adjusting, lubricating, cleaning, or unplugging machine.
•
Engage safety props to prevent lowering of header or reel before servicing in the raised position.
•
Use slow moving vehicle emblem and flashing warning lights when operating on roadways unless prohibited
by law.
MD #166466
High pressure oil hazard
WARNING
•
Do not go near leaks.
•
High pressure oil easily punctures skin causing serious
injury, gangrene, or death.
•
If injured, seek emergency medical help. Immediate
surgery is required to remove oil.
•
Do not use finger or skin to check for leaks.
•
Lower load or relieve hydraulic pressure before loosening
fittings.
214366
SAFETY
Figure 1.20: MD #113482
Figure 1.21: MD #166466
11
Revision A