Step 2. Reposition Rh Leg - MacDon M150 Assembly Instructions Manual

STEP 2. REPOSITION RH LEG

Only the right
repositioning from shipping to field configuration.
a. Support the front of the tractor leg off the ground
with stand (or equivalent).
b. Position jack under RH leg and raise jack slightly
to take some weight off leg.
c. Remove two bolts, washers, and nuts from
frame.
d. Tap out the two pins with a hammer.
Form # 169018
UNLOADING AND ASSEMBLY
cab-forward leg requires
e. Move leg out to expose one hole.
f. Re-install pins and secure with bolts, washers,
and nuts (not shown). Torque nuts to 100 ft·lbf
(136 N·m).
g. Remove bolt and shipping skids from legs.
10 Model Year - 2009