Call Procedure - Icom IC-F29DR3 Operating Instructions Manual

3
BASIC OPERATION

Call procedure

When your system uses tone signaling, a call procedure may be necessary prior to voice transmission. The
tone signaling employed may be a selective calling system, which enables you to call only specifi c stations, and
prevents unwanted stations from contacting you.
CTCSS, DTCS, Common ID must be the same on all of your group transceiver to use tone signaling.
1. S elect a channel.
 T his may not be necessary, depending on the presetting.
2. Push [S-Ring], [S-Ring/C-Ring], [Call] or [Call/C-Ring].
3. A fter transmitting, the remainder of your communication can be carried out in the normal way.
Selective calling Selective calling Non-selective calling Non-selective calling
11
FELLECS-TECH | inbox@fellecs-tech.com | www.fellecs-tech.com