Scrambler Function; Emergency Transmission; Stun Function; Priority A Channel Selection - Icom IC-F5062 Instruction Manual

2
BASIC OPERATION

■ Scrambler function

The voice scrambler function provides private communi-
cation between stations. The frequency inversion type is
equipped to all versions, moreover, the optional Rolling or
Non-rolling type can be available.
q Push [Scrambler] to turn the scrambler function ON.
• " " appears.
w Push [Scrambler] again to turn the scrambler function
OFF.
• " " disappears.

■ Emergency transmission

When [Emergency] is pushed for the specified time period,
an emergency signal is automatically transmitted. (p. 6)
When [Emergency] is pushed for the specified time period,
the DTMF or 5-tone* emergency signal is transmitted once
or repeatedly on the emergency channel. However, when no
emergency channel is specified, the signal is transmitted on
the previously selected channel.
If you want to cancel the emergency call, push and hold the
key again before transmitting the call.
* Depending on the operating model type.
13

■ Stun function

When the specified ID, set as a kill ID, is received, the stun
function is activated.
When the kill ID is received, the transceiver switches to the
password required condition. Entering of the password (p. 8)
is necessary to operate the transceiver again in this case.

■ Priority A channel selection

When one of the following operations is performed, the
transceiver selects the Priority A channel automatically.
• Turning the power ON
The Priority A channel is selected each time the trans-
ceiver power is turned ON.
• Status call
The Priority A channel is selected when transmitting a sta-
tus call. (BIIS operation only)
• Off hook.
The Priority A channel is selected when the microhone is
took off from its hanger.