D Scan Type; D Call Channel - Icom GM600 Instruction Manual

9
MENU ITEMS
■ Radio settings

D Scan Type

(Settings > Radio > Scan Type)
Selects the desired Scan type to locate signals. (p. 26)
• Normal Scan: Sequentially searches all Favorite channels.
• Priority Scan: Sequentially searches all Favorite channels,
while also monitoring Channel 16. (Default)
D Scan Timer
(Settings > Radio > Scan Timer)
Turns the Scan Resume timer ON or OFF.
• ON: When a signal is detected on a channel, the scan
pauses for 5 seconds, and then resumes.
If the signal disappears in less than 5 seconds, the
scan immediately resumes.
• OFF: When a signal is detected on a channel, the scan
pauses until the signal disappears, and then
resumes. (Default)
90
D Dual/Tri-Watch
(Settings > Radio > Dual/Tri-Watch)
Selects the desired watch type. (p. 28)
• Dualwatch: The transceiver monitors Channel 16, while
listening or talking on another channel.
(Default)
• Tri-watch: The transceiver monitors Channel 16 and
the Call channel, while listening or talking on
another channel.

D Call Channel

(Settings > Radio > Call Channel)
You can set the Call channel with your most often-used
channel for quick recall. (p. 14) (Default: Channel 16)