Installing Ap832E; Safety Precautions; Unpack The Ap832E - Meru Networks AP832 Installation Manual

This chapter describes how to install and configure an AP832e. It contains the following sections:

Safety Precautions



Unpack the AP832e


Installation Requirements

Install the AP832e

Check AP832e LED Activity

Where to Go From Here

Safety Precautions
IMPORTANT—Read and follow the regulatory instructions in Appendix B before installing and operating
this product.
If an optional power supply is used, it must be one supplied by Meru Networks.
Warning!
The AP832e is intended only for installation in Environment A as defined in IEEE 802.3af. All intercon-
nected equipment must be contained within the same building, including the interconnected equip-
ment's associated LAN connection.
Unpack the AP832e
Confirm that the AP832e shipping package contains these items:
© 2013 Meru Networks, Inc.
This product is intended to be supplied by a UL Listed power supply
marked Class 2 or LPS and rated minimum 12Vdc, 2A. For Power over
Ethernet, an 802.3af or 802.3at connection must be used.
Safety Precautions
Chapter 2

Installing AP832e

Installing AP832e iii