Installing Ap1000I; Safety Precautions - Meru Networks AP1000 Installation Manuals

AP1000i is supported by System Director versions 4.1 and greater. This chapter describes how to install
and configure an AP1000i. It contains the following sections:

Safety Precautions


Best Practices for a Mixed Network

Unpack the AP1000i

Power Requirements

Additional Equipment


Installing AP1000i


Restoring AP1000i Settings

Check AP1000i LEDs

Where to Go From Here

Safety Precautions
IMPORTANT—Read and follow the regulatory instructions in Appendix B before installing and operating
this product.
The AP1000i is only intended for installation in Environment A as defined in IEEE 802.3af. All directly
interconnected equipment (e.g., equipment sharing an electrical source) must be contained within the
same building, including the interconnected equipment's associated LAN connection.
© 2013 Meru Networks, Inc.
Safety Precautions
Chapter 2
Installing AP1000i
Installing AP1000i 7