Static Arp; Arp Table - D-Link DGS-1250 Series Reference Manual

DGS-1250 Series Gigabit Ethernet Smart Managed Switch Web UI Reference Guide

Static ARP

This window is used to display and configure the static ARP settings.
To view the following window, click L3 Features > ARP > Static ARP, as shown below:
The fields that can be configured are described below:
Parameter
IP Address
Hardware Address
Click the Apply button to accept the changes made.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

ARP Table

This window is used to display and configure the ARP table settings.
To view the following window, click L3 Features > ARP > ARP Table, as shown below:
The fields that can be configured are described below:
Parameter
Interface VLAN
IP Address
Figure 6-2 Static ARP Window
Description
Enter the IP address that will be associated with the MAC address here.
Enter the MAC address that will be associated with the IP address here.
Figure 6-3 ARP Table Window
Description
Enter the interface VLAN ID used here. This value must be between 1 and 4094.
Select and enter the IP address to display here.
125