SECTION 6
Communication with External Devices
Terminal Block
Setting Output Method and Communication Specifications
The items to be output and the timing of the output can be specified according to the procedure
below. The settings are enabled for all outputs.
1.
Enter the Set mode and select [Output].
The selections appear.
2.
Select [Terminals].
The setting screen for output data appears.
3.
Make the settings for each item.
4.
Select [End].
The setting will be registered and the screen display returns to
Z550
188
Operation Manual
Scn 0
Set
Image
Detect set
Meas set
Extra set
Meas mode
Output
Analog
Terminals
RS-232C
Scn 0
Set
Format
judge output A
9.96 [ 0]ms
OFF delay
GATE ON delay
GATE ON time
End
2
.
[ 1]ms
[ 5]ms