Changing The Input/Output Conditions Selecting The On Conditions; Changing The Input/Output Conditions; Selecting The On Conditions; One-Shot Output - Omron ZFV - V2.0 User Manual

Changing the Input/output Conditions

Selecting the ON conditions

Set whether to turn the OUTPUT signal ON when OK is judged or when NG is judged.
MENU Mode-[SYS2]-[OUTPUT]-[ON STATUS]
Setting
OK ON
NG ON (default value)

One-shot output

OUTPUT turns ON for only the preset output time from when the OUTPUT signal turns
ON.
●
Synchronous measurement
OFF
TRG
ON
OFF
OUTPUT
ON
●
Continuous measurement
OUTPUT ON at OK judgment
Judged as NG
OFF
OUTPUT
ON
Turns the OUTPUT signal ON when OK is judged.
Turns the OUTPUT signal ON when NG is judged.
Measurement processing
Judged as OK
Output time

Changing the Input/output Conditions

Description
Output time
Judged as NG
Section 3
ZFV
65
User's Manual