Table of Contents
Advertisement
6
Symbologies
This programming section contains the following menu selections. Refer to
• All Symbologies
• Aztec Code
• China Post (Hong Kong 2 of 5)
• Chinese Sensible (Han Xin) Code
• Codabar
• Codablock A
• Codablock F
• Code 11
• Code 128
• Code 32 Pharmaceutical (PARAF)
• Code 39
• Code 93
• Data Matrix
• EAN/JAN-13
• EAN/JAN-8
• GS1 Composite Codes
• GS1 DataBar Expanded
• GS1 DataBar Limited
• GS1 DataBar Omnidirectional
• GS1 Emulation
• GS1-128
All Symbologies
If you want to decode all the symbologies allowable for your scanner, scan the All Symbologies On code. If on the other hand,
you want to decode only a particular symbology, scan All Symbologies Off followed by the On symbol for that particular sym-
bology. Default = All Symbologies Off.
All Symbologies On
Note: When All Symbologies On is scanned, 2D Postal Codes are not enabled. 2D Postal Codes must be enabled separately.
Message Length Description
You are able to set the valid reading length of some of the bar code symbologies. If the data length of the scanned bar code
doesn't match the valid reading length, the scanner will issue an error tone. You may wish to set the same value for minimum
and maximum length to force the scanner to read fixed length bar code data. This helps reduce the chances of a misread.
EXAMPLE:
Decode only those bar codes with a count of 9-20 characters.
Min. length = 09Max. length = 20
Chapter 9
for settings and defaults.
• Interleaved 2 of 5
• Korea Post
• Matrix 2 of 5
• MaxiCode
• MicroPDF417
• MSI
• NEC 2 of 5
• Postal Codes - 2D
• Postal Codes - Linear
• PDF417
• GS1 DataBar Omnidirectional
• QR Code
• Straight 2 of 5 IATA (two-bar start/stop)
• Straight 2 of 5 Industrial (three-bar start/stop)
• TCIF Linked Code 39 (TLC39)
• Telepen
• Trioptic Code
• UPC-A
• UPC-A/EAN-13 with Extended Coupon Code
• UPC-E0
• UPC-E1
*All Symbologies Off
6 - 1
Advertisement
Table of Contents
