Table of Contents
Advertisement
f Maximum number of devices that can be connected simultaneously to the projector via wireless LAN is four devices.
Setting the connection key
Press as to select [WIRELESS LAN].
1)
Press qw to select [ENABLE].
2)
3)
Press the <ENTER> button.
f The [WIRELESS LAN] screen is displayed.
Press as to select [KEY].
4)
5)
Press the <ENTER> button.
f The [KEY] screen is displayed.
Press asqw to select the text, and press the <ENTER> button to enter the text.
6)
f The character string that can be registered as the connection key is as follows.
g 8 to 15 single-byte alphanumeric characters
After entering the connection key, press asqw to select [OK], and press the <ENTER> button.
7)
Press as to select [STORE], and press the <ENTER> button.
8)
f The confirmation screen is displayed.
Press qw to select [OK], and press the <ENTER> button.
9)
Note
f The factory default setting of the connection key is "spjcxxxx". xxxx is the four digit number assigned for each product.
[PROJECTOR NAME]
Change the projector name. Enter the host name if it is required to use a DHCP server.
Press as to select [PROJECTOR NAME].
1)
2)
Press the <ENTER> button.
f The [PROJECTOR NAME CHANGE] screen is displayed.
Press asqw to select the text, and press the <ENTER> button to enter the text.
3)
f Up to 12 characters can be entered.
After entering the projector name, press asqw to select [OK], and press the <ENTER> button.
4)
f To cancel, select [CANCEL].
Note
f The factory default setting of the projector name is "NAMExxxx". xxxx is the four digit number assigned for each product.
[NETWORK STATUS]
Display the network information of the projector.
Press as to select [NETWORK STATUS].
1)
2)
Press the <ENTER> button.
f The [NETWORK STATUS] screen is displayed.
Press qw to switch the display screen.
3)
f The page will change each time you press the button.
[WIRED LAN] (page 1/3), [WIRELESS LAN] (page 2/3), [WIRELESS LAN] (page 3/3)
Chapter 4 Settings — [NETWORK] menu
ENGLISH - 217
Advertisement
Table of Contents
