Table of Contents
Advertisement
[AUTO SIGNAL]
Set whether to execute automatic setup of signals automatically.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP>
button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc.
Press as to select [AUTO SIGNAL].
1)
Press qw to switch the item.
2)
f The items will switch each time you press the button.
[OFF]
[ON]
[AUTO SETUP]
Set the items to automatically adjust while automatic setup function is executed. Also, the automatic setup can be
executed.
Adjusting position automatically
Press as to select [AUTO SETUP].
1)
2)
Press the <ENTER> button.
f The [AUTO SETUP] screen is displayed.
Press as to select [POSITION ADJUST].
3)
Press qw to switch the item.
4)
[ON]
[OFF]
Adjusting signal level automatically
Press as to select [AUTO SETUP].
1)
2)
Press the <ENTER> button.
f The [AUTO SETUP] screen is displayed.
Press as to select [SIGNAL LEVEL ADJUST].
3)
Press qw to switch the item.
4)
[OFF]
[ON]
Note
f [SIGNAL LEVEL ADJUST] may not function properly unless a still image containing clear blacks and whites is input.
Executing the automatic setup
Press as to select [AUTO SETUP].
1)
2)
Press the <ENTER> button.
f The [AUTO SETUP] screen is displayed.
Press as to select [EXECUTE], and press the <ENTER> button.
3)
f The automatic setup is executed.
Chapter 4 Settings — [DISPLAY OPTION] menu
Sets the auto signal function to off.
Executes automatic setup automatically when images are changed to unregistered signals during
projection.
Adjust the screen position and size when automatic setup is executed.
Does not perform automatic adjustment.
Does not perform automatic adjustment.
Adjusts black level (the [PICTURE] menu → [BRIGHTNESS]) and white level (the [PICTURE] menu
→ [CONTRAST]) when automatic setup is executed.
ENGLISH - 133
Advertisement
Table of Contents
