Table of Contents
Advertisement
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[ENABLE]
[DISABLE]
Note
f [WIRELESS LAN] cannot be set if the optional Wireless Module (Model No.: AJ-WM50 Series) is not attached to the <USB (DC OUT)>
terminal.
f Maximum number of devices that can be connected simultaneously to the projector via wireless LAN is four devices.
Setting the connection key
1)
Press as to select [WIRELESS LAN].
2)
Press qw to select [ENABLE].
3)
Press the <ENTER> button.
f The [WIRELESS LAN] screen is displayed.
4)
Press as to select [KEY].
5)
Press the <ENTER> button.
f The [KEY] screen is displayed.
6)
Press asqw to select the text, and press the <ENTER> button to enter the text.
f The character string that can be registered as the connection key is as follows.
g 8 to 15 single-byte alphanumeric characters
7)
After entering the connection key, press asqw to select [OK], and press the <ENTER> button.
8)
Press as to select [STORE], and press the <ENTER> button.
f The confirmation screen is displayed.
9)
Press qw to select [OK], and press the <ENTER> button.
Note
f The factory default setting of the connection key is "spjcxxxx". xxxx is the four digit number assigned for each product.
[PROJECTOR NAME]
Change the projector name. Enter the host name if it is required to use a DHCP server.
1)
Press as to select [PROJECTOR NAME].
2)
Press the <ENTER> button.
f The [PROJECTOR NAME CHANGE] screen is displayed.
3)
Press asqw to select the text, and press the <ENTER> button to enter the text.
f Up to 12 characters can be entered.
4)
After entering the projector name, press asqw to select [OK], and press the <ENTER> button.
f To cancel, select [CANCEL].
Note
f The factory default setting of the projector name is "NAMExxxx". xxxx is the four digit number assigned for each product.
[NETWORK STATUS]
Display the network information of the projector.
1)
Press as to select [NETWORK STATUS].
Chapter 4 Settings — [NETWORK] menu
Select this item when the wireless LAN is to be used.
A device such as a smartphone can be directly connected to the projector even if a wireless LAN
access point is not set up separately because the projector is used as a simplified access point.
For setting procedure of the connection key, refer to "Setting the connection key" ( x page 139).
Select this item when the wireless LAN is not to be used.
ENGLISH - 139
Advertisement
Table of Contents
