Table of Contents
Advertisement
Setting [CORNER/PINCUSHION]
Press as to select [GEOMETRY].
1)
Press qw to select [CORNER/PINCUSHION].
2)
3)
Press the <ENTER> button.
f The [GEOMETRY:CORNER/PINCUSHION] screen is displayed.
Press as to select the item to adjust, and press the <ENTER> button.
4)
f When [LINEARITY] is selected, press qw to select either adjustment method ([AUTO] or [MANUAL]).
Select [AUTO] normally.
For details of operation when [MANUAL] is selected, refer to "Adjusting to desired linearity" (x page 118).
Press asqw to adjust.
5)
[UPPER LEFT]
[LINEARITY]
Horizontal direction
[PINCUSHION]
[UPPER]
[LEFT]
[FREE GRID]
Finer adjustment is possible by selecting the points or lines to be corrected.
For details of operation, refer to "Adjusting distortion with [FREE GRID]" (x page 119).
Adjusting to desired linearity
Press as to select [GEOMETRY].
1)
Press qw to select [CORNER/PINCUSHION].
2)
3)
Press the <ENTER> button.
f The [GEOMETRY:CORNER/PINCUSHION] screen is displayed.
Press as to select [LINEARITY].
4)
Press qw to select [MANUAL].
5)
6)
Press the <ENTER> button.
f The [LINEARITY] screen is displayed.
118 - ENGLISH
Chapter 4 Settings — [POSITION] menu
[CORNER/PINCUSHION]
[UPPER RIGHT]
[LOWER LEFT]
Vertical direction
[LOWER]
[RIGHT]
[LOWER RIGHT]
Advertisement
Table of Contents
