Table of Contents
Advertisement
[DISABLE]
f When [INPUT SELECT BUTTON] is selected in Step 7), the item that can be set varies depending on the
selected button.
Refer to "Item that can be set with [INPUT SELECT BUTTON]" (x page 211) for details.
Once the switching of the item is completed, press the <MENU> button to return to the [CONTROL PANEL]
screen or the [REMOTE CONTROL] screen.
Press as to select [APPLY], and press the <ENTER> button.
9)
f The confirmation screen is displayed.
10) Press qw to select [OK], and press the <ENTER> button.
Note
f When a button operation is performed on the device set to [DISABLE], the [CONTROL DEVICE PASSWORD] screen is displayed.
Enter the control device password.
f The [CONTROL DEVICE PASSWORD] screen will disappear when there is no operation for approximately 10 seconds.
f If the operations of both [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE], the projector cannot be turned off (cannot
enter standby).
f When the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main
menu.
f Even when you set button operations on the remote control disabled, operations of the <ID SET> and <ID ALL> buttons on the remote
control are kept enabled.
Item that can be set with [INPUT SELECT BUTTON]
When [INPUT SELECT BUTTON] is selected in Step 7) of "Enabling/disabling any button" (x page 210), the
item that can be selected varies depending on the button to set.
The item that can be selected when each button is set is as follows.
r [HDMI BUTTON]
[HDMI1 [SLOT1]] and [HDMI2 [SLOT1]] can be selected when the optional Interface Board for HDMI 2 input
(Model No.: ET-MDNHM10) is installed in <SLOT 1>.
[HDMI3 [SLOT2]] and [HDMI4 [SLOT2]] can be selected when the optional Interface Board for HDMI 2 input
(Model No.: ET-MDNHM10) is installed in <SLOT 2>.
[TOGGLE]
[HDMI]
[HDMI1 [SLOT1]]
[HDMI2 [SLOT1]]
[HDMI3 [SLOT2]]
[HDMI4 [SLOT2]]
[DISABLE]
r [DISPLAYPORT BUTTON]
[DisplayPort1 [SLOT1]] and [DisplayPort2 [SLOT1]] can be selected when the optional Interface Board for
DisplayPort 2 input (Model No.: ET-MDNDP10) is installed in <SLOT 1>.
[DisplayPort3 [SLOT2]] and [DisplayPort4 [SLOT2]] can be selected when the optional Interface Board for
DisplayPort 2 input (Model No.: ET-MDNDP10) is installed in <SLOT 2>.
[TOGGLE]
[DisplayPort1 [SLOT1]]
[DisplayPort2 [SLOT1]]
[DisplayPort3 [SLOT2]]
[DisplayPort4 [SLOT2]]
[DISABLE]
Chapter 4 Settings — [SECURITY] menu
Disables button operations.
Switches the input in turn between all the HDMI inputs including the HDMI input equipped on the projector
as standard and the HDMI input on the Interface Board when the button is operated.
Fixes to selection operation of the HDMI input.
Fixes to selection operation of the HDMI1 input of the Interface Board.
Fixes to selection operation of the HDMI2 input of the Interface Board.
Fixes to selection operation of the HDMI3 input of the Interface Board.
Fixes to selection operation of the HDMI4 input of the Interface Board.
Disables button operations.
Switches the items in following order when the button is operated.
[DisplayPort1 [SLOT1]] → [DisplayPort2 [SLOT1]] → [DisplayPort3 [SLOT2]] → [DisplayPort4 [SLOT2]]
Fixes to selection operation of the DisplayPort1 input of the Interface Board.
Fixes to selection operation of the DisplayPort2 input of the Interface Board.
Fixes to selection operation of the DisplayPort3 input of the Interface Board.
Fixes to selection operation of the DisplayPort4 input of the Interface Board.
Disables button operations.
ENGLISH - 211
Advertisement
Table of Contents
