Table of Contents
Advertisement
Press qw to switch [TIME ZONE].
4)
Note
f The [TIME ZONE] setting is reset to the factory default setting when the projector is initialized by one of the following methods. However, the
date and time based on the local date and time setting (Coordinated Universal Time, UTC, Universal Time, Coordinated) will be maintained
without being initialized.
g When initialized by selecting the [PROJECTOR SETUP] menu → [INITIALIZE] → [FACTORY RESET]
g When initialized by setting the [PROJECTOR SETUP] menu → [INITIALIZE] → [USER SETTINGS] → [OTHER USER SETTING] to
[INITIALIZE]
Setting the date and time manually
Press as to select [DATE AND TIME].
1)
2)
Press the <ENTER> button.
f The [DATE AND TIME] screen is displayed.
Press as to select [ADJUST CLOCK].
3)
4)
Press the <ENTER> button.
f The [ADJUST CLOCK] screen is displayed.
Press as to select an item, and press qw to set the local date and time.
5)
Press as to select [APPLY], and press the <ENTER> button.
6)
f The setting of the date and time will be completed.
Note
f The replacement of the battery inside the projector is required when the time goes out of alignment right after correcting the time. Consult
your dealer.
Setting the date and time automatically
To set the date and time automatically, the projector must be connected to the network.
Press as to select [DATE AND TIME].
1)
2)
Press the <ENTER> button.
f The [DATE AND TIME] screen is displayed.
Press as to select [ADJUST CLOCK].
3)
4)
Press the <ENTER> button.
f The [ADJUST CLOCK] screen is displayed.
Press as to select [NTP SYNCHRONIZATION], and press qw to change the setting to [ON].
5)
Press as to select [APPLY], and press the <ENTER> button.
6)
f The setting of the date and time will be completed.
Note
f If synchronization with the NTP server fails just after [NTP SYNCHRONIZATION] is set to [ON], [NTP SYNCHRONIZATION] will return to
[OFF]. If [NTP SYNCHRONIZATION] is set to [ON] while the NTP server is not set, [NTP SYNCHRONIZATION] will return to [OFF].
f Access the projector via a web browser to set the NTP server. Refer to "[Adjust clock] page" (x page 245) for details.
[SCHEDULE]
Set the command execution schedule for each day of the week.
Enabling/disabling the schedule function
Press as to select [SCHEDULE].
1)
Press qw to switch the item.
2)
f The items will switch each time you press the button.
[OFF]
190 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Disables the schedule function.
Advertisement
Table of Contents
