Table of Contents
Advertisement
f [QUAD PIXEL DRIVE] is set to [OFF] when the focus test pattern is displayed using the [TEST PATTERN] menu.
To enable the QUAD PIXEL DRIVE function while displaying the focus test pattern, set [QUAD PIXEL DRIVE] to [ON] again while displaying
the focus pattern.
[RASTER POSITION]
This will allow the position of the image to move within the display area arbitrarily when the input image is not
using the whole display area.
Press as to select [RASTER POSITION].
1)
2)
Press the <ENTER> button.
f The [RASTER POSITION] screen is displayed.
Press asqw to adjust the position.
3)
Note
f [RASTER POSITION] cannot be adjusted when the image of 1920 x 1080/240 is projected.
The video signal of 1920 x 1080/240 can be input when the optional High Frame Rate Upgrade Kit (Model No.: ET-SUK10) is applied.
128 - ENGLISH
Chapter 4 Settings — [ADVANCED MENU] menu
Advertisement
Table of Contents
