Table of Contents
Advertisement
2)
Press the <ENTER> button.
f The [LENS] screen is displayed.
Press as to select [ACTIVE FOCUS OPTIMIZER].
3)
4)
Press the <ENTER> button.
f The [ACTIVE FOCUS OPTIMIZER] screen is displayed.
Press as to select [FOCUS OFFSET SETUP].
5)
6)
Press the <ENTER> button.
f The [FOCUS OFFSET SETUP] screen is displayed.
Press as to select [FOCUS OFFSET BRIGHT] or [FOCUS OFFSET DARK].
7)
Press qw to set the parameter.
8)
Displaying the test pattern
The internal focus test pattern used with [SETUP ASSISTANT] is displayed.
Press as to select [LENS].
1)
2)
Press the <ENTER> button.
f The [LENS] screen is displayed.
Press as to select [ACTIVE FOCUS OPTIMIZER].
3)
4)
Press the <ENTER> button.
f The [ACTIVE FOCUS OPTIMIZER] screen is displayed.
Press as to select [FOCUS OFFSET SETUP].
5)
6)
Press the <ENTER> button.
f The [FOCUS OFFSET SETUP] screen is displayed.
Press as to select [TEST PATTERN].
7)
Press qw to select an item.
8)
f The items will switch each time you press the button.
[OFF]
[0%]
[50%]
[100%]
Initializing the parameter
Return all the parameters for [FOCUS OFFSET BRIGHT] and [FOCUS OFFSET DARK] saved by each setting in
the [PROJECTOR SETUP] menu → [LENS] → [LENS TYPE] to factory default settings.
Press as to select [LENS].
1)
2)
Press the <ENTER> button.
f The [LENS] screen is displayed.
Press as to select [ACTIVE FOCUS OPTIMIZER].
3)
4)
Press the <ENTER> button.
f The [ACTIVE FOCUS OPTIMIZER] screen is displayed.
Press as to select [FOCUS OFFSET SETUP].
5)
6)
Press the <ENTER> button.
f The [FOCUS OFFSET SETUP] screen is displayed.
176 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Does not display the test pattern.
Displays the focus test pattern of signal level approximately 0 %.
Displays the focus test pattern of signal level approximately 50 %.
Displays the focus test pattern of signal level approximately 100 %.
Advertisement
Table of Contents
