Table of Contents
Advertisement
Features of the Projector
High luminance and high contrast
▶ With a new-generation laser light source
and a unique optical system enhancing
the color reproduction, in addition to high
luminance of 30 500 lm and high contrast
of 20 000:1, the projector has realized
wide color gamut covering approximately
90 % of the DCI-P3 standard. HDR (High
Dynamic Range) is also supported,
allowing higher quality image content to be
reproduced as a projected image.
Easy and highly flexible setup
▶ Adopted the Interface Board method that
flexibly supports various customer systems
for the video signal input. In addition, by
supporting Art-Net, etc., it has superior
compatibility with the devices other than
projectors. Also, realized light compact
body that is readily transportable yet
the projector is a 30 000 lm class. More
advanced rendition in wide range of usage
is possible by supporting projection in all
360° direction, etc.
Long life and high reliability
▶ In addition to adopting the solid-state light
source with long life, the projector has
enhanced the dust resistance property of
the optical unit that is sensitive to dust. By
eliminating the filter, the maintenance cost
for long-term operation is reduced.
Quick Steps
For details, refer to the corresponding pages.
1. Set up the projector.
(x page 42)
2. Attach the projection lens
(optional).
(x page 58)
3. Connect with external devices.
(x page 61)
4. Connect the power cord.
(x page 70)
5. Switch on the projector.
(x page 72)
6. Make initial settings.
(x page 73)
Set the lens type.
(x page 86)
Execute the lens calibration.
(x page 87)
f Take this step when you switch on the
power for the first time after purchasing the
projector.
7. Select the input signal.
(x page 81)
8. Adjust the image.
(x page 83)
ENGLISH - 19
Advertisement
Table of Contents
