Table of Contents
Advertisement
[ON]
How to assign a program
Press as to select [SCHEDULE].
1)
Press qw to select [ON], and press the <ENTER> button.
2)
f The [SCHEDULE] screen is displayed.
3)
Select and assign a program to each day of week.
f Press as to select the day of week, and press qw to select a program number.
f You can set the program from No.1 to No.7. "- - -" indicates that the program number has not been set.
How to set a program
Set up to 16 commands to each program.
Press as to select [SCHEDULE].
1)
Press qw to select [ON], and press the <ENTER> button.
2)
f The [SCHEDULE] screen is displayed.
Press as to select [PROGRAM EDIT].
3)
Press qw to select a program number, and press the <ENTER> button.
4)
Press as to select a command number, and press the <ENTER> button.
5)
f You can change the page using qw.
Press asqw to select [TIME], and press the <ENTER> button.
6)
f The projector is in the adjustment mode (the time is blinking).
Press qw to select "hour" or "minute", and press as or the number (<0> - <9>) buttons to set a
7)
time, and then press the <ENTER> button.
Press asqw to select [COMMAND].
8)
9)
Press the <ENTER> button.
f The [COMMAND] detailed screen is displayed.
10) Press as to select a [COMMAND].
f For [COMMAND] which requires detailed settings, the items of the detailed settings will switch each time
you press qw.
f When [INPUT] is selected, press the <ENTER> button, and then press asqw to select the input to be
set.
[COMMAND]
[POWER ON]
[STANDBY]
[SHUTTER]
Chapter 4 Settings — [PROJECTOR SETUP] menu
Enables the schedule function. Refer to "How to assign a program" (x page 191) or "How to set a
program" (x page 191) for how to set the schedule.
Detailed settings of
[COMMAND]
―
―
[OPEN]
[CLOSE]
Description
Switches on the projector.
Enters standby.
Disables the shutter function (shutter: opened).
Enables the shutter function (shutter: closed).
ENGLISH - 191
Advertisement
Table of Contents
