Table of Contents
Advertisement
Specifications
The specifications of the projector are as follows.
Display system
Size of effective display
area
Display device
Number of pixels
Supplied projection
lens
Zoom
Projection lens
Focus
Lens shift
Changeable lens
Light source
Screen size
Light output
*1*2
Contrast ratio
*1
Center to corner zone ratio
*1
Horizontal
Displayable
scanning
frequency
Vertical
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118:2020 international standards.
*2 When a projection lens other than ET-D75LE95 is used with the power supply voltage of AC 200 V.
Chapter 7 Appendix — Specifications
3-chip DLP projection system
24.4 mm (0.96") x 3 (aspect ratio 16:10)
2 304 000 pixels (1 920 x 1 200
dots)
9 216 000 pixels (3 840 x 2 400
dots)
Optional
Powered
Powered
Powered (Horizontal/Vertical)
Yes
Laser diode
1.78 m (70") to 25.40 m (1 000")
1.78 m (70") to 15.24 m (600")
5.08 m (200") to 15.24 m (600")
3.05 m (120") to 15.24 m (600")
30 500 lm
24 000 lm
20 000 lm
20 000:1
90 %
27 kHz to 135 kHz
27 kHz to 148.1 kHz
24 Hz to 120 Hz
24 Hz to 240 Hz
when [QUAD PIXEL DRIVE] is set to [OFF]
when [QUAD PIXEL DRIVE] is set to [ON]
with ET-D3LET80, ET-D75LE8
with ET-D3LEW200, ET-D3LEU100
with ET-D75LE95
when [OPERATING MODE] is set to [NORMAL]
when [OPERATING MODE] is set to [ECO]
when [OPERATING MODE] is set to [QUIET]
when [DYNAMIC CONTRAST] is set to [3]
when using the optional High Frame Rate Upgrade Kit
(Model No.: ET-SUK10)
when using the optional High Frame Rate Upgrade Kit
(Model No.: ET-SUK10)
ENGLISH - 309
Advertisement
Table of Contents
