Table of Contents
Advertisement
f Geometric & Setup Management Software (Geometry Manager Pro)
This application software performs detailed corrections and adjustments such as the geometric adjustment
which cannot be covered by the projector settings in real-time. Also, the geometric adjustment and edge
blending matching the shape of the screen using a camera, and the adjustment of color and luminance can be
automatically performed with simple steps.
"Geometric & Setup Management Software" can be downloaded from the Panasonic website (https://panasonic.
net/cns/projector/pass/). It is necessary to register and login to PASS
*1 PASS: Panasonic Professional Display and Projector Technical Support Website
For details, visit the Panasonic website (https://panasonic.net/cns/projector/pass/).
Storing
To store the projector, store in a dry room.
Disposal
To dispose of the product, ask your local authorities or dealer for correct methods of disposal. Also, dispose of the
product without disassembling.
Cautions on use
rTo get a good picture quality
In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or blinds
over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps from
shining onto the screen.
rDo not touch the surface of the projection lens with your bare hands.
If the surface of the projection lens becomes dirty from fingerprints or anything else, this will be magnified and
projected onto the screen.
Attach the supplied lens cover to the optional projection lens when not using the projector.
rDLP chips
f The DLP chips are precision-made. Note that in rare cases, pixels of high precision could be missing or always
lit. Such a phenomenon does not indicate malfunction.
f Directing a high-power laser beam onto the projection lens surface can damage the DLP chips. By closing the
mechanical shutter built into the projector, it can prevent damaging of the DLP chips by a high-power laser
beam while using the shutter function (shutter: closed). To close the mechanical shutter while using the shutter
function, set [MECHANICAL SHUTTER] to [ENABLE]. For details of the setting, refer to the [DISPLAY OPTION]
menu → [SHUTTER SETTING].
rDo not move the projector or subject it to vibration or impact while it is operating.
Doing so may shorten the life of the built-in motor.
rLight source
The light source of the projector uses laser diode, and has the following characteristics.
f Depending on the operating environment temperature, the luminance of the light source will decrease.
The higher the temperature becomes, the more the luminance of the light source decreases.
f The luminance of the light source will decrease by duration of usage.
If brightness is noticeably reduced and the light source does not turn on, ask your dealer to clean inside the
projector or replace the light source unit.
rComputer and external device connections
When connecting a computer or an external device, read this manual carefully regarding the use of power cords
and shielded cables as well.
rSlot
This projector is equipped with SLOT NX-specification slot.
The input for HDMI, DVI-D, and SDI can be added by installing the optional Interface Board in the slot.
"SLOT NX" is a name of the slot unique to Panasonic supporting the signal input for the 4K image.
Chapter 1 Preparation — Precautions for use
to download.
*1
ENGLISH - 27
Advertisement
Table of Contents
