Table of Contents
Advertisement
HDMI signal input
DIGITAL LINK signal
input
Input
compatibility
DisplayPort signal
input
*1
DVI-D signal input
SDI signal input
SDI OPT signal input
<HDMI IN> terminal
<DIGITAL LINK>
terminal
<MULTI PROJECTOR
SYNC IN> terminal
<MULTI PROJECTOR
SYNC OUT> terminal
<SERIAL IN> terminal
<SERIAL OUT> terminal D-Sub 9 p x 1, RS-232C compliant, for computer control
<REMOTE 1 IN>
Connecting
terminal
terminal/slot
<REMOTE 1 OUT>
terminal
<REMOTE 2 IN>
terminal
<LAN> terminal
<USB> terminal
<DC OUT 1> terminal
<DC OUT 2> terminal
<SLOT 1>
<SLOT 2>
*1 This is supported when the optional Interface Board for DisplayPort 2 input (Model No.: ET-MDNDP10) is installed in the slot.
*2 This is supported when the optional Interface Board for DVI-D 2 input (Model No.: ET-MDNDV10) is installed in the slot.
*3 This is supported when the optional Interface Board for 12G-SDI (Model No.: ET-MDN12G10) is installed in the slot.
*4 This is supported when the optional Interface Board for 12G-SDI Optical (Model No.: ET-MDNFB10) is installed in the slot.
*5 This terminal is compatible with the etherCON
310 - ENGLISH
Chapter 7 Appendix — Specifications
Moving image signal resolution:
480/60p, 576/50p to 4 096 x 2 160/60p
Still image signal resolution:
640 x 480 to 3 840 x 2 400 (non-interlace)
Dot clock frequency:
25 MHz to 594 MHz
Moving image signal resolution:
480/60p, 576/50p to 4 096 x 2 160/60p
Still image signal resolution:
640 x 480 to 3 840 x 2 400 (non-interlace)
Dot clock frequency:
25 MHz to 297 MHz
Moving image signal resolution:
720/50p to 4 096 x 2 160/60p
Still image signal resolution:
640 x 480 to 3 840 x 2 400 (non-interlace)
Dot clock frequency:
25 MHz to 594 MHz
Moving image signal resolution:
480/60p, 576/50p to 2 048 x 1 080/60p
Still image signal resolution:
*2
640 x 480 to 1 920 x 1 200 (non-interlace)
Dot clock frequency:
25 MHz to 162 MHz
HD-SDI signal, 3G-SDI signal, 6G-SDI signal, 12G-SDI signal
*3
HD-SDI signal, 3G-SDI signal, 6G-SDI signal, 12G-SDI signal
*4
HDMI x 1, HDCP 2.2 compatible, Deep Color compatible
RJ-45 x 1, for network and DIGITAL LINK connections (HDBaseT
(class 2) compatible, 100Base-TX, Art-Net compatible, HDCP 2.2 compatible, Deep Color
compatible
BNC x 1, TTL high impedance
BNC x 1, TTL output: Maximum 10 mA
D-Sub 9 p x 1, RS-232C compliant, for computer control
M3 stereo mini jack x 1, for remote control (wired)/for projector connection control
M3 stereo mini jack x 1, for remote control (wired)/for projector connection control
D-Sub 9 p x 1, for contact control
RJ-45 x 1, for network connection, PJLink (class 2) compatible, 10Base-T/100Base-TX, Art-
*5
Net compatible
USB connector (type A) x 1, for connecting the optional Wireless Module (Model No.:
AJ-WM50 Series), for connecting USB memory
USB connector (type A) x 2, for power supply only (DC 5 V, 2 A total for two terminals)
SLOT x 2, SLOT NX specification, for installing the Interface Board
series cable connector (NE8MX*, NE8MC*) of Neutrik.
®
compliant), PJLink
TM
Advertisement
Table of Contents
