Table of Contents
Advertisement
Press as to select [WIRELESS LAN].
4)
Press qw to set [ENABLE].
5)
f For details, refer to [WIRELESS LAN] (x page 216).
Press as to select [NETWORK STATUS], and press the <ENTER> button.
6)
f The [NETWORK STATUS] screen is displayed.
Press qw to display [WIRELESS LAN] (page 2/3).
7)
f Confirm [SSID] and [KEY].
Note
f [WIRELESS LAN] cannot be set if the optional Wireless Module (Model No.: AJ-WM50 Series) is not attached to the <USB> terminal.
f Attach the Wireless Module to the <USB> terminal directly without using a USB extension cable or USB hub.
f The indicator on the Wireless Module blinks in blue while the main power of the projector is turned on.
f If the indicator on the Wireless Module does not blink even when the projector is turned on, re-insert the Wireless Module into the <USB>
terminal.
Operating the computer
1)
Turn on the computer.
2)
Perform the network setting.
f Perform the network setting on the computer following the instruction of the network administrator so that it
can be connected to the projector.
3)
Connect the Wireless Module to the projector via wireless LAN.
f When connecting, confirm the [WIRELESS LAN] setting displayed in the [NETWORK STATUS] screen of
the projector.
Using the QR code
A smartphone can be connected to the projector via wireless LAN just by reading the QR code that the projector
displays with the camera on a smartphone.
r Compatible devices
iPhone: iOS 11 or later
Android devices: Android 6.0 or later
Note
f A device supporting reading of a QR code and application software of the camera supporting reading of a QR code are required.
f For the devices that the operation has been verified with this projector, visit the Panasonic website (https://panasonic.net/cns/projector/).
Note that the verification for devices of other manufacturers has been made for the items set by Panasonic Corporation, and not all the
operations have been verified. For operation or performance problems caused by the devices of other manufacturers, contact the respective
manufacturers.
r Displaying the QR code in OSD
The following is the operation of the projector when reading the QR code displayed in the on-screen menu (OSD).
1)
Press the <MENU> button to open the [NETWORK] menu from the main menu.
f The [NETWORK] screen is displayed.
Press as to select [NETWORK STATUS], and press the <ENTER> button.
2)
f The [NETWORK STATUS] screen is displayed.
230 - ENGLISH
Chapter 5 Operations — Network connection
Advertisement
Table of Contents
