Network; Projector Name; Network Setup - Panasonic PT-VW440U Operating Instructions (Functional Manual)

Network

Select [Setting] from the Main Menu (see
"Navigating through the menu" on page 36),
then select the item from the sub-menu.
Remote Control

Projector name

You can change the projector name to be displayed
on the network.
1 ) Press ▲ ▼ to select [Projector name],
and press <ENTER> button.
2 ) Select characters with the ▲ ▼◄►
buttons and press the <ENTER>
button to enter the projector name.
Select [BS] to delete one character selected
with the cursor in the input box and press the
<ENTER> button.
3 ) Select [Set] with the ▲ ▼◄► buttons
and press the <ENTER> button.
Select [Cancel] to undo the changes and then
press the <ENTER> button.
4 ) Select [YES] or [No] with the ▲ ▼
buttons and press the <ENTER>
button.
Note
□□□□ ] ( □□□□ is four-digit number) is set
[Name
z
before the projector leaves the factory.

Network setup

You can make detailed wired LAN settings.
1 ) Press ▲ ▼ to select [Network setup],
and press <ENTER> button.
2 ) Press ▲ ▼ to select an item, and
change the setting according to the
instructions.
Control Panel
DHCP
(DHCP client
function)
IP address
(Display of IP
address and setting)
Subnet mask
(Displaying and
setting the subnet
mask)
Default gateway
(Display of gateway
address and setting)
DNS1
(Display of
Preferred DNS
server address
and setting)
DNS2
(Display of
Alternate DNS
server address
and setting)
3 ) Press ▲ ▼◄► to select [Set], and press
<ENTER> button.
Default wired LAN settings
z
The following settings are set before the
projector leaves the factory.
DHCP
IP address
Subnet mask
Default gateway
DNS1/DNS2
Note
Before using the DHCP server, make sure the DHCP
z
server is already functioning.
For details of IP address, subnet mask, gateway and
z
DNS, ask the network administrator
On: If a DHCP server
exists in the
network to which
the projector is
connected, the
IP address will
automatically be
acquired.
Off: If a DHCP
server does
not exist in the
network to which
the projector
is connected,
additionally set
[IP address],
[Subnet mask
] and [ Default
gateway ].
Enter the IP address
if DHCP server is not
used.
If not using a DHCP
server, enter the subnet
mask.
Enter the gateway
address if DHCP server
is not used.
Enter the DNS server
address if DHCP server
is not used.
Enter the alternate DNS
server address if DHCP
server is not used.
Off
192.168.10.100
255.255.255.0
192.168.10.1
NONE
.
ENGLISH -
61