Table of Contents
Advertisement
Lens position setting page
Click [Projector control] → [Detail control] → [LENS] → [SET POSITION].
1
[Get]
Acquires the current lens position and displays the acquired
values in the lens position information field.
Lens position information field
2
Enter the lens position (vertical position, horizontal position,
focus position, and zoom position).
Note
f The zoom position is displayed in the lens position information field only in following case.
g When the standard DC motor unit installed in the Zoom Lens (Model No.: ET-D75LE6, ET-D75LE8, ET-D75LE10, ET-D75LE20,
ET-D75LE30, ET-D75LE40) is replaced with the stepping motor unit using the Stepping Motor Kit (Model No.: ET-D75MKS10), or when a
projection lens with the stepping motor is attached.
[Network config] page
Click [Detailed set up] → [Network config].
1)
Click [Network config].
f Click [Network config] to display the [CAUTION!] screen.
2)
Select the item to change the setting.
f The [WIRELESS LAN] setting can be selected only when the optional Wireless Module (Model No.:
AJ-WM50 Series) is attached.
3)
Click [Next].
f The current settings are displayed.
4)
Click [Change].
f The setting change screen is displayed.
Chapter 5 Operations — Web control function
1
2
3
4
3
[Back]
Returns to the [LENS] page.
4
[Apply]
Moves to the lens position displayed in the lens position
information field.
ENGLISH - 243
Advertisement
Table of Contents
