Table of Contents
Advertisement
Terminal
<HDMI IN> terminal,
<DIGITAL LINK> terminal,
<HDMI IN 1> terminal, <HDMI
IN 2> terminal, <HDMI IN
3> terminal, <HDMI IN 4>
terminal
<DVI-D IN 1> terminal, <DVI-D
IN 2> terminal, <DVI-D IN
3> terminal, <DVI-D IN 4>
terminal
<DisplayPort IN 1> terminal,
<DisplayPort IN 2> terminal,
<DisplayPort IN 3> terminal,
<DisplayPort IN 4> terminal
4)
Press the <ENTER> button.
Note
f For details of the types of video signals that can be used with the projector, refer to "List of compatible signals" (x page 313).
f This may not function properly for some connected external devices.
f The selection item for the input signal to the <HDMI IN 1> terminal and the <HDMI IN 2> terminal can be selected when the optional
Interface Board equipped with the HDMI input is installed in <SLOT 1>.
f The selection item for the input signal to the <HDMI IN 3> terminal and the <HDMI IN 4> terminal can be selected when the optional
Interface Board equipped with the HDMI input is installed in <SLOT 2>.
f The selection item for the input signal to the <DVI-D IN 1> terminal and the <DVI-D IN 2> terminal can be selected when the optional
Interface Board equipped with the DVI-D input is installed in <SLOT 1>.
f The selection item for the input signal to the <DVI-D IN 3> terminal and the <DVI-D IN 4> terminal can be selected when the optional
Interface Board equipped with the DVI-D input is installed in <SLOT 2>.
f The selection item for the input signal to the <DisplayPort IN 1> terminal and the <DisplayPort IN 2> terminal can be selected when the
optional Interface Board equipped with the DisplayPort input is installed in <SLOT 1>.
f The selection item for the input signal to the <DisplayPort IN 3> terminal and the <DisplayPort IN 4> terminal can be selected when the
optional Interface Board equipped with the DisplayPort input is installed in <SLOT 2>.
f For the SDI input and the SDI OPT input, the signal format can be set in detail in the [DISPLAY OPTION] menu → [SLOT IN].
sRGB-compliant video
sRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International
Electrotechnical Commission).
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1)
Set [COLOR MATCHING] to [OFF].
f Refer to [COLOR MATCHING] (x page 130).
2)
Display the [PICTURE] menu.
f Refer to "[PICTURE] menu" (x page 105).
Press as to select [PICTURE MODE].
3)
Press qw to set [NATURAL].
4)
Press as to select [COLOR].
5)
6)
Press the <DEFAULT> button on the remote control to set the factory default setting.
7)
Follow Steps 5) to 6) to set [TINT], [COLOR TEMPERATURE], [GAMMA], and [SYSTEM DAYLIGHT
VIEW] to the factory default settings.
Note
f sRGB is available for RGB signal input only.
Chapter 4 Settings — [PICTURE] menu
480/60p or 576/50p signal
Signals other than above
480/60p or 576/50p signal
Signals other than above
Select [AUTO], [RGB], or [YP
P
B
System format
Select [AUTO], [RGB], or [YC
Select [AUTO], [RGB], or [YP
Select [RGB] or [YC
C
].
B
R
Select [RGB] or [YP
P
].
B
R
].
R
C
].
B
R
P
].
B
R
ENGLISH - 113
Advertisement
Table of Contents
