Table of Contents
Advertisement
2)
Press the <ENTER> button.
f The [RS-232C] screen is displayed.
Press as to select [INPUT SELECT].
3)
Press qw to switch the item.
4)
[PROJECTOR]
[DIGITAL LINK]
Press as to select [(IN) BAUDRATE].
5)
Press qw to switch the item.
6)
f The items will switch each time you press the button.
[9600]
[19200]
[38400]
Press as to select [(IN) PARITY].
7)
Press qw to switch the item.
8)
f The items will switch each time you press the button.
[NONE]
[EVEN]
[ODD]
Setting the communication condition of the <SERIAL OUT> terminal
Press as to select [RS-232C].
1)
2)
Press the <ENTER> button.
f The [RS-232C] screen is displayed.
Press as to select [(OUT) BAUDRATE].
3)
Press qw to switch the item.
4)
f The items will switch each time you press the button.
[9600]
[19200]
[38400]
Press as to select [(OUT) PARITY].
5)
Press qw to switch the item.
6)
f The items will switch each time you press the button.
[NONE]
[EVEN]
[ODD]
Setting the response
Press as to select [RS-232C].
1)
2)
Press the <ENTER> button.
f The [RS-232C] screen is displayed.
Press as to select [RESPONSE(ID ALL)].
3)
Chapter 4 Settings — [PROJECTOR SETUP] menu
Performs the RS-232C communication with the <SERIAL IN> terminal of the projector.
Performs the RS-232C communication via the optional DIGITAL LINK output supported device (Model
No.: ET-YFB100G, ET-YFB200G) and the <DIGITAL LINK> terminal.
Select the proper speed.
Select the parity condition.
Select the proper speed.
Select the parity condition.
ENGLISH - 195
Advertisement
Table of Contents
